Torrance Porsche and BMW Repair

Mon - Fri: 8:00 AM - 5:00 PM

Monthly Archives: December 2012

Porsche Engine Rev Limiter Systems

Porsche Engine Rev Limiting Systems Engine Rev Limiter systems started in the early Porsche 911’s as a mechanical sliding ignition rotor whose sole job was to cut power in the event of an engine RPM over-rev. A section of the ignition rotor would slide outwards driven by centrifugal force depending on the engines RPM speed and would eventually make contact with a ground terminal, shutting the engine off until the engine reached a safe RPM range. The simplicity of the past is now gone and replaced with an extremely accurate electronic control system. The rev limiter for the 9X6’s and 9X7’s utilize a fuel/ignition cut off system operated by the DME (Digital Motor Electronics) controller that engages when the engines RPM reaches a model specific maximum limit. In addition to the current rev-limiter controls, today the DME keeps a record of all engine over-revs. The over-rev capture capability should be checked during a PPI (Pre-Purchase Inspection) be ... read more


If You Are Using A Screen Reader And Are Having Problems Using This Website, please call Callas Rennsport (310) 370-7038 For Assistance.